Owning a motorhome offers you the fantastic opportunity to go on a trip at any time. When selecting and configuring your motorhome, in addition to the right layout and an appealing design, you should also consider the factors that influence how you can use your motorhome—and weight plays a key role here. In particular, you must ensure that the motorhome has sufficient payload capacity (i.e., the remaining weight available for personal luggage, etc.) to accommodate friends, family, special equipment, accessories, and extras according to your individual needs, so you can safely enjoy your trip.
Below, we provide some important information to help you understand :
– why the weight of your motorhome is of central importance,
– how you should factor vehicle weight into your purchasing decision, and
– how you can enjoy traveling in your motorhome without exceeding legal limits.
Please note: The technical specifications listed in the type approval for models available on the market are provided for guidance only, as these specifications may vary depending on the vehicle variant or model you choose, as well as the optional equipment and packages you wish to install in your motorhome.
Our network of authorized dealers and importers has the necessary expertise to advise you on your selection based on your individual needs. If in doubt, the dealers and importers are also in direct contact with the manufacturer’s technical departments.
Important: The actual available payload of your vehicle (and thus the remaining weight available for personal luggage, etc.) depends directly on the intended use and the weight of the planned load—including the actual number of passengers (adults or children). For your own safety, this weight must be distributed appropriately according to your vehicle’s interior layout and must never result in the technically permissible gross vehicle weight (TPGV) for which type approval was granted being exceeded (detailed information on this can be found below).
UNDERSTANDING WEIGHT AND TECHNICAL TERMS RELATED TO RECREATIONAL VEHICLES
1. The Technically Permissible Gross Weight (tzG)
The tzG is the maximum permissible gross weight of the motorhome as specified by the manufacturer. You can find this figure in the technical specifications (e.g., 3,500 kg, 4,250 kg, 4,400 kg). The tzG must not be exceeded while driving. Otherwise, you may face fines in many European countries, including Germany. As the driver, you are responsible for ensuring compliance with the tzG. We therefore recommend that you check your vehicle before setting out and, if in doubt, have it weighed.
2. The vehicle’s weight when ready to drive
The mass in running order stated in the Certificate of Conformity (CoC) is determined as follows:
– the curb weight of the vehicle, including the body and operating fluids such as lubricants, oils, coolant, and exhaust aftertreatment fluid;
– standard equipment: all equipment items included as standard in the vehicle’s factory specification;
– the fresh water tank, which is filled to 100% capacity during operation according to the manufacturer’s specifications (i.e., 10 L or 20 L);
– an aluminum gas cylinder weighing between 6 kg and 20 kg;
– the weight of the fuel tank and the fuel it contains, which is filled to 90% of its capacity;
– the statutory weight of the driver, which is set at 75 kg.
Information regarding the curb weight specified in the type approval process can be found in the technical specifications for the respective vehicle. Please note that this curb weight, after the manufacturing process is complete, may deviate by -/+ 5% (maximum permissible production-related tolerance) from the nominal value stated in the Certificate of Conformity (CoC). Since these variations affect the vehicle’s remaining payload (i.e., the weight available for personal luggage, etc.), the occurrence of legally permissible deviations must be taken into account as early as the vehicle configuration stage and when selecting packages and optional equipment.
Of course, we continuously monitor our manufacturing processes to minimize any production-related deviations that may result, for example, from weight fluctuations in individual components or weather conditions (e.g., humidity). Despite all our efforts, however, production-related deviations cannot be completely ruled out. For this reason, the actual weight of every motorhome we manufacture is checked at the end of the production line while the vehicle is in running condition.
3. The number of passengers
The number of seat-belt-equipped seats (including the driver) is determined by the manufacturer as part of the type approval process. Each passenger is legally assigned a weight of 75 kg. When calculating the mass of the passengers, the driver’s mass is not taken into account, as it is already included in the mass of the motorhome in running order.
Example: For a motorhome with four seat belts (including the driver), the mass of the passengers is 3 × 75 kg = 225 kg.
Please note that selecting certain equipment packages and optional features may reduce the number of seat belts or require an increase in the vehicle’s load capacity (if possible).
4. Optional Equipment
In accordance with legal provisions, “optional equipment” refers to any optional feature that is not part of the motorhome’s standard equipment and that is installed by the manufacturer at the customer’s request (e.g., solar panel, awning, oven, satellite system).
Information regarding the weight of such optional equipment offered for sale by the manufacturer is listed in the technical specifications.
However, this optional equipment does not include additional items (accessories) that are either offered for sale by your local dealer or that you install on your vehicle yourself. Please also note that the weight of these additional items also reduces the vehicle’s remaining payload (the weight available for personal luggage, etc.) (see point 6 below).
5. Actual mass of the vehicle
The actual mass of the vehicle does not correspond to the actual weighed mass of the motorhome.
Rather, it refers to the mass of the vehicle in running order plus the mass of the optional equipment ordered by the customer and installed in the motorhome by the manufacturer.
Please note that the actual mass of the vehicle specified in Section 13.2 of the CoC is a calculated value derived from the respective type approval and not the individual vehicle weight. Furthermore, it should be noted that the actual measured weight of the vehicle may differ from the mass in running order due to any production-related weight tolerances (see Section 2 for more information).
6. Payload and Minimum Payload
The payload refers to the maximum load a vehicle can carry. It is calculated by
– the mass in running order,
– the mass of the passengers, and
– the mass of packages (optional equipment) and additional equipment (accessories)—see section 4 for more information—
subtracted from the gross vehicle weight rating (GVWR).
When determining the design characteristics of a motorhome, the manufacturer must distribute the gross vehicle weight (tzG) across the vehicle’s axles. In this context, motorhomes must have and distribute a legally required minimum payload (MN), which is determined as follows:
MN in kg ≥ 10 (n + L)
Where:
“n” is the maximum number of approved seating positions, including the driver,
and
“L” is the total length of the vehicle in meters.
The minimum payload is the legally required remaining weight in a motorhome that is available for individual cargo, such as personal luggage, clothing, food, and equipment.
Example: For a motorhome with a length of 7 m and 4 seats approved for driving (i.e., 3 passengers plus the driver), the minimum payload is 10 kg * (4 + 7) = 110 kg.
When selecting optional equipment, care must therefore be taken to ensure that the sum of the mass in running order, the mass of the passengers, and the mass of the optional equipment:
– neither exceeds the technically permissible gross mass (tzG),
– nor falls below the minimum payload.
Example: For a vehicle with a length of 7 m and 4 seats approved for passenger transport (i.e., 3 passengers plus the driver), a technically permissible gross vehicle weight of 3,500 kg, and a mass of packages or optional equipment of 100 kg:
(a) the minimum payload is 110 kg (10 kg × (4 + 7)),
(b) the vehicle’s remaining payload (i.e., the weight remaining for personal luggage, etc.) in running order, excluding manufacturing tolerances, is:
3 500 kg Technically Permissible Gross Vehicle Weight
– 2 910 kg Weight when ready to drive
– 225 kg (3*75 kg) Mass of the passengers
– 100 kg Weight of Packages / Optional Equipment
= 265 kg Remaining payload (available weight for personal luggage, etc.)
(c) The vehicle’s remaining payload (available weight for personal luggage, etc.) is, in the case of a production-related deviation of +3% in road-ready condition:
3 500 kg Technically Permissible Gross Vehicle Weight
– 2 997,3 kg Weight in running order (with a production-related deviation of +3% within the permissible tolerance of -/+5%)
– 225 kg (3*75 kg) Mass of the passengers
– 100 kg Weight of Packages / Optional Equipment
= 177,7 kg Remaining payload (available weight for personal luggage, etc.)
7. Conclusion
When configuring and planning your motorhome, you’ll need to make compromises regarding the vehicle’s weight.
The combination of optional equipment that you can order for each model variant of a motorhome can theoretically be determined as follows, based on the rated values from the type approval:
Example: For a vehicle with a length of 7 m, 4 approved seats while driving (i.e., 3 passengers plus the driver), and a technically permissible gross vehicle weight of 3,500 kg:
3 500 kg technically permissible gross vehicle weight
– 2 900 kg Weight when ready to drive
– 3*75 kg (225 kg) Mass of the passengers
– 110 kg Minimum payload (see calculation in section 6)
= 265 kg Maximum permissible weight of packages and additional equipment
Finally, when selecting optional equipment, please note that the mass in running order may be subject to permissible variations of -/+ 5% during the manufacturing process. Such a variation accordingly affects the vehicle’s payload and thus the remaining weight available for personal luggage, etc., and may therefore reduce the maximum permissible mass of the optional equipment.
Furthermore, the actual weight of a completed motorhome can only be determined by weighing it at the end of the assembly line. In exceptional cases, such a weighing may reveal that the vehicle’s actual payload (the remaining weight available for personal luggage, etc.) falls below the minimum payload due to permissible variations in the mass in running order of -/+ 5%. In such a case, before delivering your motorhome, we will work closely with you and your dealer to carefully assess whether your vehicle should be upgraded to a higher weight class, the number of approved seating positions while driving should be reduced (provided that the type approval permits such a change and you are authorized to drive such a heavy vehicle), or optional equipment should be removed.
With all this information regarding weight and the gross vehicle weight rating of motorhomes, you are now ready to configure your motorhome with the help of your local dealer and safely embark on your next motorhome trip.
Note: Weight specifications and inspections for recreational vehicles have been governed by EU Implementing Regulation No. 2021/535 since June 2022; prior to that, the provisions of EU Implementing Regulation No. 1230/2012 applied.
